The guardrail pile driver is a type of highway guardrail steel pipe pile driving equipment, which adopts diesel power and full hydraulic mechanical transmission. It has the characteristics of light driving, high pile driving accuracy, durability, energy conservation and environmental protection, and is particularly suitable for the installation, maintenance, and emergency repair of highway guardrails in field engineering construction.
Preparation work
Before using the guardrail pile driver, some preparation work needs to be done. Firstly, it is necessary to ensure that the pile driver matches the power supply to avoid damaging the machine due to voltage mismatch. Secondly, it is necessary to clean the construction area to ensure that the guardrail pile driver can enter and exit freely.
Install pile head
Install the pile head of the guardrail pile driver properly. The pile head should be installed on the base of the pile driver and ensure that the pile head is perpendicular to the ground, in order to drive the pile during the construction process.
Pile driving construction
Align the pile driver with the construction area, press the start button, and slowly bring the pile head closer to the ground. Then make adjustments to align the pile head with the target position. Press the start button again to turn on the guardrail pile driver, control the lifting and lowering of the pile head, and drive it into the ground until the set depth is reached. By continuously adjusting the angle of the pile head and mastering the speed of takeoff and landing, efficient and accurate pile driving construction can be achieved.
Summary
The guardrail pile driver is a road guardrail construction equipment that can improve construction efficiency, reduce construction time and labor intensity. When using a guardrail pile driver, preparation work needs to be carried out and the correct usage methods should be followed to ensure construction quality and operational safety.
Multi use of one machine saves time and effort
Proficient in drilling and pulling, proficient in every aspect
Fast pile driving in 8 seconds
Construction feedback cases
Model
|
JK-920 |
External dimensions
|
4200*2150*2750mm |
Walking mode
|
Manual four-wheel drive
|
Engine power
|
38KW/51.68HP |
Vehicle weight
|
4.6t |
Speed
|
30-35km |
Hammer head pressure
|
20-22mpa |
Hammer head model
|
75 |
Tire model
|
20.5-16 wear-resistant steel wire tire
|
Hammer stroke
|
2200mm |
Pile driving speed
|
15-25S |
Working fuel consumption
|
3.5-4.5L/H |
Vehicle wheelbase
|
2200mm |
Vehicle wheelbase
|
1860mm |
Hammer frequency
|
16hz |
Hydraulic pump pressure
|
20-25mpa |
Braking method
|
Oil brake
|
Chassis
|
Special chassis for pile driver
|
Model |
JK-926 |
External dimensions
|
4200*2150*2750mm |
Walking mode
|
Automatic four-wheel drive
|
Engine power
|
42KW/57.12HP |
Vehicle weight
|
4.6t |
Speed |
30-35km |
Hammer head pressure
|
20-22mpa |
Hammer head model
|
75 |
Tire model
|
20.5-16 wear-resistant steel wire tire
|
Hammer stroke
|
2200mm |
Pile driving speed
|
15-25S |
Working fuel consumption
|
3.5-4.5L/H |
Vehicle wheelbase
|
2200mm |
Vehicle wheelbase
|
1860mm |
Hammer frequency
|
16HZ |
Hydraulic pump pressure
|
20-25mpa |
Braking method
|
Air brake
|
Chassis |
Special chassis for pile driver
|
The honors we have received
Q: Can you accept special designs and specifications?
A: Of course you can. As is well known, traffic regulations vary in different regions, and our professional engineers will design according to the special requirements of customers, while well-trained employees will carry out production.
Q: What is your delivery time?
A: Usually, we conduct inventory of goods, and if we have inventory of products, the delivery time is 10-15 days after receiving the deposit.
If we don't have any inventory products, we will arrange production immediately and the delivery time is 30-45 days, depending on the order quantity.
Q: What can I buy from you?
Self dumping semi-trailer, box semi-trailer, container semi-trailer, low flatbed semi-trailer, automobile transportation semi-trailer, flatbed semi-trailer.
Truck cranes, oil tankers, mixer trucks, dump trucks, freight trucks, mining trucks, tractors.
Customized products, mechanical component products, tractors, agricultural machinery, etc.
Q: How is your product?
A:High quality products - every process of material selection, welding, sandblasting, and painting has undergone careful inspection, and has undergone 100% inspection during and after the process.
Q:Are you a factory? Can I trust your company?
A:Yes, we are the source factory. Our company was established in 1997 and has gone through more than 20 years of market development. Now, we have a high reputation in the industry and a good reputation.
Q:Why should I purchase from you instead of from other suppliers?
A:Competitive pricing - We are an industrial and trade enterprise that integrates the production and sales of Chinese automobile machinery manufacturers, as well as automobile maintenance and component processing.